This page has been automatically translated. There may therefore be discrepancies and inaccuracies in the text. Only the original version is binding. Legal claims arising from the content of the translated version are excluded.

Display removal of installations

Application for planning permission (§ 71 in conjunction with § 63 BauO LSA)
  • Service description

    According to Section 60 (3) of the Building Regulations of the State of Saxony-Anhalt (BauO LSA), the removal of

    1. Installations in accordance with § 60 Para. 1 BauO LSA,
    2. free-standing buildings of building classes 1 and 3,
    3. other installations that are not buildings with a height of up to 10 metres

    procedurally free.

    In addition, the intended removal of installations must be notified to the competent authority at least one month before the start of the removal.
     

  • Procedure

    In the case of non-freestanding buildings, the stability of the building or buildings to which the building to be removed is attached must be assessed by a qualified structural engineer within the meaning of Section 65 (2) BauO LSA and verified to the required extent; the removal must be monitored by the qualified structural engineer if necessary. § Section 65 (2) sentence 3 BauOLSA does not apply if the building is attached to a building not subject to procedural requirements.

  • Who should I contact?

    Responsibility lies with the district, the independent city and the cities of Naumburg, Stendal, Köthen, Weißenfels and Zeitz.

  • Which documents are required?

    • Completed official notification form
  • What fees are incurred?

    There are no fees.

  • What deadlines do I have to observe?

    Before starting the removal

    Application deadline: 1 month

  • Legal basis

  • Short text

    According to Section 60 (3) of the Building Regulations of the State of Saxony-Anhalt (BauO LSA), the removal of

    1. Installations in accordance with § 60 Para. 1 BauO LSA,
    2. free-standing buildings of building classes 1 and 3,
    3. other installations that are not buildings with a height of up to 10 metres

    procedurally free.

    In addition, the intended removal of installations must be notified to the competent authority at least one month before the start of the removal.
     

  • Typing

    4

Help with accessibility

  • General

    We strive to make our websites accessible to all users. Details can be found in our accessibility statement. You can send us your suggestions for improvement using our accessibility feedback form.

  • Font size

    To adjust the font size, please use the following key combinations:

    Larger

    command
    +

    Smaller

    command

    Larger

    Ctrl
    +

    Smaller

    Ctrl
  • Keyboard navigation

    Use TAB and SHIFT + TAB to navigate through next/previous links, form elements, and buttons.

    Use ENTER to open links and interact with elements.

  • Contrast mode

    Press the following key combination to reduce or increase the contrast:

    Enlarge

    control
    option
    command
    .

    Decrease

    control
    option
    command
    ,
    Note: The shortcuts must be activated in the system settings of the operating system.

    Press the left ALT key + left SHIFT key + PRINT to quickly turn high contrast mode on or off.

  • Invert colours

    Press the following key combination to switch the colour inversion on and off:

    control
    option
    command
    8
    Note: The shortcuts must be activated in the system settings of the operating system.

    First activate the screen magnifier and then switch the colour inversion on and off with the following key combinations:

    1. screen magnifier

    +

    2. invert colours

    Ctrl
    Old
    I
  • Screen magnifier

    Press the following key combinations to use the screen magnifier:

    Switch on/off

    option
    command
    8

    Enlarge view

    option
    command
    =

    Zoom out view

    option
    command
    Note: The shortcuts must be activated in the system settings of the operating system.

    Switch on / Enlarge view

    +

    Zoom out view